Bookcases
Position the light around shelf depth, displayed items and visible hotspots.
BEXLIGHTING / APPLICATION SOLUTION
Under-shelf LED strip lighting for custom joinery.
Integrate a discreet light line into bookshelves and custom furniture. Start with the shelf recess and section lengths, then explore products and connection options for your assembly.
THE LIGHTING GOAL
Make the complete illuminated assembly fit the furniture detail.
THE KEY CONSTRAINT
Cutting units, connectors and end caps can occupy more space than the visible line.
START WITH THIS DRAWING
A joinery section with usable recess dimensions, illuminated lengths and service openings.
INSTALLATION POSITIONS
Place the light with a purpose.
Identify each position and its individual length. The mounting detail should follow how the space is viewed and used.
Use your furniture drawings to define the actual light positions.
Floating shelves
Show the recess and connections before the shelf is fabricated.
Media units
Coordinate accent lighting with screens, finishes and accessible electrical parts.
Built-in furniture
Record individual lengths, tolerances and access after final assembly.
INSTALLATION DETAIL / CONCEPT
Dimension the entire assembly.
Specify usable width and depth rather than a nominal slot. Include end details, marked cutting units and cable bends before agreeing the furniture manufacturing drawing.
- Mark individual lengths and approved cut positions.
- Confirm profile clearance and cable exits.
- Keep drivers and service connections accessible.
Concept diagram only. Not to scale; connections, supply and feed limits require the exact component instructions.
COMPONENT SCOPE
Products and support for this application.
LED strip
Exact SKU, CCT, individual lengths and confirmed performance.
Profile & cover
Usable dimensions, mounting method, end caps and visual sample.
Feeds & controls
Connections, compatible supply and any sensor or dimming system.
Approval record
Drawings, sample reference and relevant product documents.
Planning checklist only; component availability and supply scope must be confirmed in the quotation.
SELECTION REQUIREMENTS
Light placement and installation checks
Short sections and cut points
Use the exact marked cut interval to plan a strip that fits. The remaining space must also accommodate connectors and end details; short-cut candidates still need sample and datasheet confirmation.
Recess and profile detail
Provide a section drawing with usable width and depth. Review the diffuser position, mounting surface and heat-management requirements for the proposed components.
Wiring within furniture
Plan cable exits and accessible joints before manufacture. Avoid routing decisions that make a driver or connection inaccessible after assembly.
PRODUCTS TO COMPARE
LED strips to consider for this application
Explore the linked models for this application. Choose the protection rating and mounting arrangement to suit the actual installation.
SMD / PRODUCT
Dense 2216 LED Strip with 25mm Cut Units
SR005-280P2216IP20
- Voltage
- 24V
- PCB width
- 10 mm
- Protection
- IP20
SMD / PRODUCT
24V White 2835 LED Strip with 50mm Cut Units
SR005-120P2835IP20
- Voltage
- 24V
- PCB width
- 8 mm
- Protection
- IP20
Need COB, short-cut or another construction?
Explore the product range →Explore our COB, SMD and Neon Flex range, or ask about a custom requirement.
RELATED SERIES & CUSTOM REQUIREMENTS
Explore the product options.
Review its series, or describe the dimensional and assembly requirements that need confirmation.
FROM APPLICATION TO INQUIRY
Explore the range or talk to BEXLIGHTING.
FURNITURE & CABINET MAKERS
Lighting for furniture production.
Share module drawings, tolerances, required cut lengths and connector requirements. Clarify any request for labelling, harnesses or preassembly before quotation.
- Module sections, tolerances and repeated lengths
- Connector, labelling and harness requirements
- Cutting-unit review, mock-up and agreed preassembly scope
PROJECT BUYERS & INSTALLERS
Lighting for your project.
Share the joinery elevation and section, individual illuminated lengths, wiring route and accessible power location. Coordinate the detail before the furniture is fabricated.
- Joinery elevation, recess section and material finishes
- Each illuminated length, feed route and access opening
- Profile sample, mounting requirements and installer interfaces
QUESTIONS & ANSWERS
Questions about shelving & joinery.
Is PCB width the full installed width?
No. Profile, diffuser, connector and mounting details determine the assembled dimensions.
Can I cut at any point to fit a shelf?
Use only the marked cutting positions and approved instructions for the exact product.
Does a narrow strip guarantee a narrow complete fixture?
No. Confirm the dimensions of the entire assembly rather than the PCB alone.
RELATED READING
What to include in your project inquiry
Use the application article alongside the exact component specifications.
Technical guides →Load and length tools →
PROJECT PLANNING
What to include in a cabinet-lighting quotation request
Share the cabinet dimensions, lighting needs and approximate quantities with BEXLIGHTING so we can discuss suitable products and a quotation.
Read the article →MODEL SELECTION
Fit the lighting into the joinery
Use usable profile dimensions and repeated section lengths to narrow the models. Leave access for cables, connectors and future maintenance.
Evaluate the chosen BEXLIGHTING model in your own profile or assembly before finalising a larger installation.
Compare model specifications →Under-shelf LED strip lighting for custom joinery
Under shelf LED strip lighting needs room for the profile, strip and connections without weakening or overcrowding the furniture detail. A bookshelf may use several separate illuminated sections rather than one continuous circuit. Record each usable length and connection position, then choose a construction that produces the desired appearance with the actual diffuser.
Continue with SMD LED strip selection for cabinet & furniture details · Custom LED strips for cabinet & furniture projects · 24V LED strip power supply & wiring planning.
