Shelf displays
Review light distribution across products at the front and rear of each shelf.
BEXLIGHTING / APPLICATION SOLUTION
Display cabinet LED strip lighting for merchandise.
Show merchandise clearly with lighting integrated into your display case. Share the shelf dimensions, materials and viewing position so we can discuss strip models and sample options.
THE LIGHTING GOAL
Present merchandise consistently while controlling direct glare and glass reflections.
THE KEY CONSTRAINT
Product materials and customer viewing positions determine the sample review.
START WITH THIS DRAWING
A display elevation and section showing merchandise, glazing, profile position and feed routes.
INSTALLATION POSITIONS
Place the light with a purpose.
Identify each position and its individual length. The mounting detail should follow how the space is viewed and used.
Use your furniture drawings to define the actual light positions.
Glass showcases
Compare reflected light from customer viewpoints and allow shielding around glazing.
Boutique fixtures
Record the approved light appearance and assembly for repeated fixtures.
Trade-show display furniture
Define portable wiring, connectors and reassembly requirements for the display.
INSTALLATION DETAIL / CONCEPT
Aim the light at the merchandise.
Draw the shelf, glazing and customer view together. Test the proposed profile and diffuser on actual merchandise, and record the visual reference for repeated displays.
- Mark individual lengths and approved cut positions.
- Confirm profile clearance and cable exits.
- Keep drivers and service connections accessible.
Concept diagram only. Not to scale; connections, supply and feed limits require the exact component instructions.
COMPONENT SCOPE
Products and support for this application.
LED strip
Exact SKU, CCT, individual lengths and confirmed performance.
Profile & cover
Usable dimensions, mounting method, end caps and visual sample.
Feeds & controls
Connections, compatible supply and any sensor or dimming system.
Approval record
Drawings, sample reference and relevant product documents.
Planning checklist only; component availability and supply scope must be confirmed in the quotation.
SELECTION REQUIREMENTS
Light placement and installation checks
Colour and sample approval
Specify the desired white-light appearance and colour-rendering requirements. Evaluate a sample on the actual merchandise; a nominal CCT or CRI label is not a complete approval.
Reflections and shielding
Review glass, metal and polished surfaces from customer viewing positions. The position of the profile and diffuser can matter as much as the strip family.
Repeatability and maintenance
For repeated fixtures, record the approved configuration and replacement requirements. Plan access to cables, drivers and connectors without dismantling the entire display.
PRODUCTS TO COMPARE
LED strips to consider for this application
Explore the linked models for this application. Choose the protection rating and mounting arrangement to suit the actual installation.
SMD / PRODUCT
Dense 2216 LED Strip with 25mm Cut Units
SR005-280P2216IP20
- Voltage
- 24V
- PCB width
- 10 mm
- Protection
- IP20
SMD / PRODUCT
2835 LED Strip — ER90, 80 LEDs/m
SR005-80P2835IP20-ER90
- Voltage
- 24V
- PCB width
- 8 mm
- Protection
- IP20
Need COB, short-cut or another construction?
Explore the product range →Explore our COB, SMD and Neon Flex range, or ask about a custom requirement.
RELATED SERIES & CUSTOM REQUIREMENTS
Explore the product options.
Review its series, or describe the dimensional and assembly requirements that need confirmation.
FROM APPLICATION TO INQUIRY
Explore the range or talk to BEXLIGHTING.
FURNITURE & CABINET MAKERS
Lighting for furniture production.
Send fixture sections, standard shelf lengths, material finishes and the number of repeated units. Agree the appearance and wiring of a sample fixture before bulk purchasing.
- Fixture sections, shelf lengths and finishes
- Repeated fixture quantities and replacement requirements
- Merchandise sample, approved light appearance and wiring scope
PROJECT BUYERS & INSTALLERS
Lighting for your project.
Provide display elevations, the merchandise type, viewing positions and the required control system. Coordinate lighting with signage and other sources in the shop.
- Merchandise type, display elevations and viewing angles
- Nearby light sources, controls and individual powered sections
- Colour evidence, sample fixture and documentation schedule
QUESTIONS & ANSWERS
Questions about retail displays.
Is a high CRI label enough for display approval?
No. Obtain the relevant report and evaluate the light on actual merchandise under intended conditions.
Can one driver supply many shelves?
That depends on the confirmed load, permitted runs, cable arrangement and driver requirements; review the complete layout.
RELATED READING
What to include in your project inquiry
Use the application article alongside the exact component specifications.
Technical guides →Load and length tools →
PRODUCT SELECTION
COB or SMD for cabinet lighting: what should you compare?
Compare the visible light line, physical fit, cut points and confirmed output before choosing a family for cabinetry.
Read the article →MODEL SELECTION
Light the product, control reflections
Compare colour rendering and the visible light line against the display materials. Verify reflections with the product and glazing in place.
Evaluate the chosen BEXLIGHTING model in your own profile or assembly before finalising a larger installation.
Compare model specifications →Display cabinet LED strip lighting for merchandise
Display cabinet LED strip lighting should reveal the merchandise without creating distracting reflections in the glazing. Review light positions above and below shelves and compare sample appearance against the displayed materials. For high colour-rendering requirements, request the selected model’s documented CRI option rather than relying on a series label.
Continue with High-CRI LED strip selection: colour temperature & samples · COB LED strip selection for cabinetry & shelves · Custom LED strips for cabinet & furniture projects.
