Top Bend Neon Flex
Compare models listed in the top-bend category and confirm the approved bending plane for the exact route.
Explore this direction →Silicone neon flex selection for shaped light details.
Explore silicone-enclosed LED lighting by bending direction and section size. Define the intended light path, then confirm the illuminated face, mechanical limits and protection of the complete assembly.
A flexible light line starts with the right bending plane.
Neon flex combines an LED light source with a silicone enclosure. Top-bend, side-bend and 3D labels are useful catalogue directions, but the approved bend plane and minimum radius must come from the exact model’s instructions.
Prepare the selection brief →What to confirm
- Bending direction
- Confirm the permitted bending plane and minimum radius. Do not infer mechanical limits from a photograph.
- Section & illuminated face
- Compare enclosure width and height, emission direction, mounting channel and the visible light line.
- Protection & terminations
- Request the applicable protection rating for the assembled product, including end caps, joints and cable exits.
- Cuts, feeds & installation
- Confirm cutting units, powered-run limits, cable routing and mounting requirements for the intended route.
Choose the bending direction.
Side Bend Neon Flex
Review enclosure fit, illuminated-face orientation and the stated bending requirements.
Explore this direction →3D Neon Flex
Confirm the permitted multi-directional movement and minimum radius before approving the drawing.
Explore this direction →Compare Silicone neon flex models
11 models in the catalogue. Compare the product details below.
3D-Series Silicone LED Neon Flex — 16 × 16mm
SR006-1616D-168P2835IP67
- Voltage
- 24V
- Enclosure size
- 16 × 16 mm
- Protection
- IP67
Side-Bend LED Neon Flex — 12 × 25mm IP68 Model
SR006-1225S-140P2835IP68
- Voltage
- 24V
- Enclosure size
- 12 × 25 mm
- Protection
- IP68
Compact Side-Bend LED Neon Flex — 6 × 12mm
SR006-0612S-140P2835IP67
- Voltage
- 24V
- Enclosure size
- 06 × 12 mm
- Protection
- IP67
10 × 10mm Top-Bend LED Neon — 1010T IP65
SR006-1010T-168P2835IP65
- Voltage
- 24V
- Enclosure size
- 10 × 10 mm
- Protection
- IP65
Top-Bend LED Neon for Curved Lines — 1010T3 IP65
SR006-1010T3-168P2835IP65
- Voltage
- 24V
- Enclosure size
- 10 × 10 mm
- Protection
- IP65
Low-Profile Top-Bend LED Neon — 1004TF IP65
SR006-1004TF-120P2835IP65
- Voltage
- 24V
- Enclosure size
- 10 × 4.5 mm
- Protection
- IP65
Low-Profile Top-Bend LED Neon — 1004T IP65
SR006-1004T-120P2835IP65
- Voltage
- 24V
- Enclosure size
- 10 × 4.5 mm
- Protection
- IP65
16 × 16mm Top-Bend LED Neon — 1616T IP68
SR006-1616T-140P2835IP68
- Voltage
- 24V
- Enclosure size
- 16 × 16 mm
- Protection
- IP68
Lighting ideas for this range.
Explore applications and mounting ideas for your lighting project.
Cove LED strip lighting for interior joinery details
Plan cove LED strip lighting with BEXLIGHTING. Review recess dimensions, diffuser appearance, feed positions and project-specific strip requirements.
Explore the application →
Display cabinet LED strip lighting for merchandise
Plan display cabinet LED strip lighting with BEXLIGHTING. Review reflections, colour rendering, shelf placement and model configuration requirements.
Explore the application →
LED strip lighting for hotel furniture & joinery
Plan hotel furniture LED strip lighting with BEXLIGHTING. Review bedside, wardrobe and fitted-joinery details, switching and repeatable section schedules.
Explore the application →Frequently asked questions
Resolve the details that affect your selection.
Is every silicone neon product suitable outdoors?
No. A silicone enclosure does not establish a tested protection rating. Confirm the exact model, terminations, installation conditions and required product information.
Can the product bend in any direction?
Only within the model’s stated limits. Define the bend plane and request the minimum radius and mounting instructions before shaping the route.
What dimensions should a drawing include?
Show the light path, usable channel size, individual lengths, bend locations, cable exits and feed positions. Identify viewing direction and installation conditions.
Can I request a sample for a curved route?
Yes. Include the proposed bend plane, radius, mounting method and required light appearance so the sample scope can be reviewed.
Explore more of the BEXLIGHTING range.
APPLICATION DETAILS
Plan the light around its setting.
Setback, illuminated surface and corner details influence the indirect wash. Compare the proposed detail in a mock-up.
The lighting position, glass and display height work together. Evaluate reflections from the customer viewing angle.
Silicone neon flex selection for shaped light details
Neon flex LED strip selection depends on the route of the light line and the model’s permitted bending plane. Top-bend, side-bend and 3D-series names are a starting point; the exact enclosure and bend limits need model-specific review. This is a component selection page, not an offer of custom neon signs.
Continue with Under-shelf LED strip lighting for custom joinery · LED strip IP rating guide for furniture installations · Custom LED strips for cabinet & furniture projects.
