Hanging compartments
Review vertical side profiles with the actual hanging rail and clothing depth.
BEXLIGHTING / APPLICATION SOLUTION
Closet & wardrobe LED strip lighting.
Bring light into hanging spaces, shelves and wardrobe compartments. Compare strip options and discuss section lengths, cable exits and the switching behaviour you want.
THE LIGHTING GOAL
Make clothing and compartments visible when the furniture is used.
THE KEY CONSTRAINT
Doors, hanging clothes and shelves affect both light position and sensor operation.
START WITH THIS DRAWING
A cabinet layout showing compartments, door movement, sensor position and cable routes.
INSTALLATION POSITIONS
Place the light with a purpose.
Identify each position and its individual length. The mounting detail should follow how the space is viewed and used.
Use your furniture drawings to define the actual light positions.
Shelving
Check how shelf-mounted light reaches the contents without shining into the eye.
Drawer lighting
Define activation behaviour and a cable route suitable for the drawer mechanism.
Walk-in wardrobe joinery
Coordinate separate compartments and the service access needed after installation.
INSTALLATION DETAIL / CONCEPT
Coordinate light, door movement and switching.
Test a representative wardrobe module. Show the intended light position and switching sequence on the furniture drawing, then confirm the sensor and load as a complete system.
- Mark individual lengths and approved cut positions.
- Confirm profile clearance and cable exits.
- Keep drivers and service connections accessible.
Concept diagram only. Not to scale; connections, supply and feed limits require the exact component instructions.
COMPONENT SCOPE
Products and support for this application.
LED strip
Exact SKU, CCT, individual lengths and confirmed performance.
Profile & cover
Usable dimensions, mounting method, end caps and visual sample.
Feeds & controls
Connections, compatible supply and any sensor or dimming system.
Approval record
Drawings, sample reference and relevant product documents.
Planning checklist only; component availability and supply scope must be confirmed in the quotation.
SELECTION REQUIREMENTS
Light placement and installation checks
Light position
Compare side-mounted and shelf-mounted locations with the actual cabinet depth and contents. Clothing and shelves can block light; a bright strip alone does not establish useful visibility.
Switching and sensors
Define whether operation follows a door, hand movement or a manual switch. Confirm sensor type, mounting position, load limits and compatibility with the driver and control system.
Assembly and service access
Provide the cabinet section, usable profile width and cable route. Allow replacement access for the driver and connections after the furniture has been installed.
PRODUCTS TO COMPARE
LED strips to consider for this application
Explore the linked models for this application. Choose the protection rating and mounting arrangement to suit the actual installation.
SMD / PRODUCT
Dense 2216 LED Strip with 25mm Cut Units
SR005-280P2216IP20
- Voltage
- 24V
- PCB width
- 10 mm
- Protection
- IP20
SMD / PRODUCT
24V White 2835 LED Strip with 50mm Cut Units
SR005-120P2835IP20
- Voltage
- 24V
- PCB width
- 8 mm
- Protection
- IP20
Need COB, short-cut or another construction?
Explore the product range →Explore our COB, SMD and Neon Flex range, or ask about a custom requirement.
RELATED SERIES & CUSTOM REQUIREMENTS
Explore the product options.
Review its series, or describe the dimensional and assembly requirements that need confirmation.
FROM APPLICATION TO INQUIRY
Explore the range or talk to BEXLIGHTING.
FURNITURE & CABINET MAKERS
Lighting for furniture production.
Define standard module sizes, repeatable cut lengths, harness requirements and the approved switching behaviour. Any preassembly or custom supply scope requires confirmation.
- Module sizes, harness routes and quantities
- Approved sensor behaviour and electrical interfaces
- Representative sample, assembly scope and replacement access
PROJECT BUYERS & INSTALLERS
Lighting for your project.
Provide the cabinet layout and door construction, the desired switching sequence and available driver locations. Confirm the assembled system before approving installation.
- Door construction, compartment layout and hanging positions
- Desired switching sequence and accessible supply locations
- Individual sections, wiring details and sample review
QUESTIONS & ANSWERS
Questions about wardrobes & closets.
Does every wardrobe need a door sensor?
No. Choose operation around the furniture and user requirements, then confirm the control arrangement.
Can any sensor work with any 24V strip?
No. Supply voltage alone does not establish compatibility; check sensor ratings, wiring and the complete system.
Where should the driver be located?
Plan an accessible location that meets the manufacturer’s installation and temperature requirements. Do not bury serviceable components without an access plan.
RELATED READING
What to include in your project inquiry
Use the application article alongside the exact component specifications.
Technical guides →Load and length tools →
CONTROLS & WIRING
Wardrobe lighting: define the sensor and wiring before ordering
Choose the desired switching behaviour first, then verify sensor ratings, mounting position and compatibility with the lighting system.
Read the article →MODEL SELECTION
A discreet fit inside the furniture
Check the available channel width and cutting points. Sensor choice and wiring layout affect how the finished wardrobe lighting operates.
Evaluate the chosen BEXLIGHTING model in your own profile or assembly before finalising a larger installation.
Compare model specifications →Closet & wardrobe LED strip lighting
A closet LED strip light can illuminate hanging garments, shelves or drawer zones, but those positions need different mounting and switching arrangements. Check whether the door blocks the light, whether clothes conceal a sensor and how cables cross the furniture sections. Confirm the available voltage and control behaviour before selecting the model.
Continue with Wardrobe LED sensor wiring & switching planning · High-CRI LED strip selection: colour temperature & samples · Custom LED strips for cabinet & furniture projects.
