Glass Display Shelf Lighting: A Planning Example

Begin with the merchandise height, shelf spacing and shopper eye positions. A top-only source can leave lower shelves in shadow; a light on each shelf introduces more wiring and more possible reflections. Neither arrangement should be chosen from an empty frontal photograph.

These are candidate arrangements, not claims of measured performance. Put a tall and a low item on adjacent shelves and review both straight-on and obliquely.

A fixed cable exit may work at one shelf height and become strained or visible at another. Show the permitted shelf positions, connection access and slack-management method. Keep cables out of door seals, shelf supports and sharp edges. The manufacturer-approved connection detail must suit the actual movement.

For illustration, four illuminated shelves each needing a 700 mm strip describe four sections and 2.8 m of strip. That quantity says nothing about a safe single run or suitable connector; the reviewed circuit and equipment limits determine those.

Use the 4000K vs 5000K article when those are the intended choices. For warm wood or decorative objects, a different pair may be relevant. CCT does not establish colour fidelity, and glass reflections are not corrected by changing only the Kelvin value.

Send a cabinet elevation, shelf depth and spacing, merchandise examples, shopper sightlines, adjustable/fixed shelf decision and accessible service side. Identify which parts are to be supplied as finished modules. Product candidates should be connected to these requirements, not presented as universally approved for glass cases.

This is an application design note. It does not document a completed BEXLIGHTING customer installation.