Start with the control chain
| Requirement | Assembly question |
|---|---|
| Wall-dimmer operation | Does the exact supply support that input and dimmer type? |
| Low-voltage controller | What are its supply, channel and connection limits? |
| DALI scene integration | Which certified control gear and required device features are supported? |
| Door or occupancy trigger | Does the sensor switch the chosen load or provide a control signal? |
| Adjustable white | Are channel wiring and CCT control supported throughout the chain? |
Do not put an arbitrary dimmer on the input of a non-dimmable supply, or assume a control input can carry the strip’s load current. Follow the equipment documentation and reviewed wiring arrangement.
Test the operating conditions that the label omits
Check startup at low settings, the lowest acceptable level, transitions, power-return state and the required scene memory. Include the real sensor or wall control where it affects operation. A full-output demonstration does not answer these questions.
For a headboard, also check whether the guest can understand the controls. For several cabinet branches on one controller, identify current per channel and shared connections rather than checking only supply watts.
Record a measurable requirement where needed
“Dims nicely” is difficult to reproduce. Record the required control range and the accepted operating states. If flicker or temporal light modulation has a contractual criterion, use the specified measurement method; a phone video is not a complete test report.
Changing the supply or controller can reopen compatibility questions even if voltage and nominal wattage stay the same. Keep the accepted component references with the order.
